The PIXO C1.1 charges:
- All* 3.6-3.7 V or 7.2-7.4 V Li-Ion / Li-Po Battery Packs from Digital Cameras and Camcorders
| |
*The following battery packs cannot be charged: Canon BP-809, BP-819, BP-827, Canon LP-E6, Koyocera BP-800/1000, Leica M8, Sharp BT-L2, BT-L12. Battery packs with different voltage. For example: CR-V3 und CR123A with 3V or Nikon EN-EL4 with 11.1V. All other types can be charged if the battery is contacted correctly and none defective. |
- 1-2 NiMH / NiCd 1.2 V AA Mignon or AAA Micro Rechargeable Batteries
|
Technical specification
Li-Ion / Li-Po charge function
- Unique snap-in support and contact method without additional adapter plates
- Special microcontroller to control and supervise all charge processes
- Short circuit protection with automatic polarity and voltage detection
- Smart Vmax pulse charge with faulty battery pack detection
- Top-up charging phase with over charge protection and 11 hours safety timer
- Battery Activator function for deep discharged Li-Ion batteries
- Charging time minimum of one hour depending on battery charge status and capacity
- Li-Ion / Li-Po charge output rating: 4.2-8.4 VDC ~500 mA
NiMH / NiCd charge function
- Unique snap-in support and contact method for 1-2 NiMH / NiCd 1.2 V AA Mignon or AAA Micro batteries
- Special microcontroller to control and supervise all charge processes
- Smart deltaV Cold-Charge-Methode and trickle charge
- Charging time from 2-10 hours depending on battery charge status and capacity
- NiMH / NiCd charge output rating: 2 x 1.4 VDC ~500 mA
Generic technical specifications
- LEDs for visual indication of Li-Ion, NiMH or NiCd charge process
- Compact and light base unit with 125 x 65 x 27 mm and 85 grams
- Worldwide home use via the ultra light and compact 100-240 V switch mode power supply with 12 VDC 700 mA
- Mobile use via 12V car cigarette lighter plug
Scope of supply (what is in the box)
- Base Unit, Power Supply, Car Cigarette Lighter Plug, Users Manual
|
deutsch | english 
